Products

Description Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description This kit suits the MoTeC M190 ECU. The kit includes all 3 connector kits required to wire to a MoTeC M190 ECU. • MS AS616-26SN • MS AS616-35SN • MS AS616-35SA Please Contact Us for further information.

Description • Internal USB3 memory stick • Mechanically latched • Anodized housing • Resistant to water, vibration, and the elements This cable only fits the standard USB cable offered here. Please Contact Us for further information.

metri-pack electrical connection, and an all stainless steel design that is compatible with all fluids, the MoTeC professional series of pressure sensors have the repeatability and accuracy needed for the most demanding environments. Additionally, these pressure sensors have a dash-3 female threaded input for easy adoption to any...

Description Connecting to the PC's Serial Port Use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM). The PCI cable contains electronics in the ECU end of the cable to convert the ECU signals to signals compatible with the serial...

Description This kit suits the MoTeC PDM16 and PDM16 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 22 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description This kit suits the MoTeC PDM32 and PDM32 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 24 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 23 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 7 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 8 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 12 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description • Professional grade, military spec - built for maximum data integrity • Internal USB 3.0 memory stick • Mechanically latched with a keyway that easily locates into the mating connector - ideal for fast changeovers in locations that are difficult to see or...

Description Looking for a way to flush mount your new 15 button keypad? Here is your solution! Comes complete with countersunk bolts and nylock nuts. Just mount your keypad to this piece and mount that into your application! Simple as that! **Keypad not included**...

Description Looking for a way to flush mount your new 8 button keypad? Here is your solution! Comes complete with countersunk bolts and nylock nuts. Just mount your keypad to this piece and mount that into your application! Simple as that! **Keypad not included**...

New old stock, brand new in a box, never used!These are non-backlight models with 8MB of standard logging memory. (Pro Logging can be purchased as an upgrade, please contact us for this option)The MoTeC sport dash logger is an excellent entry level logger that...

Description Documentation The STC (Serial to CAN) adaptor converts RS232 data to CAN and vice versa allowing multiple RS232 devices to be connected to a Data Logger via CAN. Please Contact Us for further information. Documents Title Type 🗎 Datasheet PDF

The Shift Light Module (SLM) from MoTeC can be used multiple ways as either a shift light system, warning lights or other forms of indication as programmed by the end user. The SLM is a bright indicator light system, featuring eight multi-color LED's designed in a compact...